16 channel robot servo control board

Description:

The servo controller can run online debugging steering gear, you can save the download action group, realize off-line operation!PC software can provide 128 (0-127) group action preservation, in which each group action and can save 256 action, big enough for you! 
This is the newly upgraded controller board. Up to 16 servo motors can be controlled at the same time, either by using a software on a PC, or UART communication ( TTL serial port) of MCU (51, AVR, ARM, FPGA, PIC, etc.) to send commands to control the steering. We can also download instructions to the servo motor controller for offline operation.Software (in English) is sent via email after purchase.

This is a 16 channel micro USB servo controller, which uses a 32-bit processor, fast response, and stable operation. The USB interface can be directly interfaced with a pc. Self-detect Baud-rate (9600, 19200, 38400, 57600, 115200, 128000).

Example:
Serial.begin(115200); // Set baud-rate to be 115200
Serial.print("#1P1200T1000\r\n"¬); // Turn channel 1 on at 1200 position for 1000ms.
Serial.print("#1P1200T1000#2P1600T1000\r\n"¬); // Turn channel 1 and 2 simultaneously

Features:
32-bit CPU
Power of servo and control board are separate Chip
Power Supply: 4.5V ~ 5.5V (USB powered)
Servo Power Supply: Generally DC 5V (base on the servo you use)
Channel: 16 (servo speed adjustable)
Communication Input: USB or Serial Port(TTL)
Signal Output: PWM (accuracy 1us)
Servo Motor Resolution: 1us- 0.045 degrees
Baud Rate: 9600- 19200- 28400- 57600- 115200- 128000 (recognized automatically)

User Manual and program :

https://drive.google.com/file/d/1NBlgFv6A17Soa6JzrUbhBEXwMcrfVuYN/view?usp=sharing