Raspberry Pi Build HAT Power Supply EU Plug
Βάρος και διαστάσεις προϊόντος
Περιγραφή
Raspberry Pi Build HAT Power Supply
Δώστε ενέργεια στις δημιουργίες σας με το Raspberry Pi Build HAT με το Official τροφοδοτικό του Raspberry Pi Build HAT.
Αυτό το τροφοδοτικό με 48W, θα τροφοδοτήσει τους κινητήρες του LEGO® TechnicTM που είναι συνδεδεμένοι με το Build HAT, καθώς και το Raspberry Pi σας. Συμβατό με κινητήρες και αισθητήρες LEGO Technic που περιλαμβάνονται στην σειρά LEGO® Education SPIKETM, το Build HAT συνδυάζει τη δύναμη του Raspberry Pi computing με τις εύκολες κατασκευές της LEGO που θα σας βοηθήσουν να κάνετε δημιουργικά και στιβαρά έργα.
Specification
Output
Output voltage: +8.0V DC
Minimum load current: 0.01A
Nominal load current: 6.0A
Maximum power: 48.0W
Load regulation: ±5%
Line regulation: ±5%
Ripple & noise: 200mVp-p
Rise time: 100ms maximum to regulation limits for DC outputs
Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
Protection: Short circuit protection | Overcurrent protection | Overvoltage protection
Efficiency: 87.77% minimum (output current from 100%, 75%, 50%, 25%)
Output cable: 1.5m 16AWG
Output connector: Barrel connector 5.5mm × 2.1mm × 11mm Centre positive
Input
Voltage range: 100-240Vac (rated) 96-264Vac (operating)
Frequency: 50/60Hz ±3Hz
Current: 1.2A maximum
Power consumption (no load): 0.1W maximum
Inrush current: No damage shall occur and the input fuse shall not blow