2.13inch e-paper display 250x122, HAT for Raspberry Pi

Αξιολόγηση: Δεν αξιολογήθηκε ακόμη

Κατασκευαστής

Διαθεσιμότητα : Σε stock 1 Προϊόν(ντα) Άμεσα Διαθέσιμο

Κωδικός προϊόντος :48-12915

Βάρος και διαστάσεις προϊόντος

Βάρος προϊόντος: 0.0100KG

18,90 €

Χωρίς ΦΠΑ : 15,24 €

Προσθήκη στην Wishlist

Προσθήκη για σύγκριση

Ρωτήστε μας για αυτό το προϊόν

Περιγραφή

2.13″ e-Paper HAT

partial refresh support, low power, wide viewing angle, paper-like effect

Ideal for price tags, shelf labels, industrial instruments...

Size2.13"
Resolution250×122
Viewing Angle>170°
Display ColorBlack and White
Grey Scale2

CommunicationSPI
Display PanelE-paper
ExperiencePaper-like
EnvironmentAmbient Light Required
Display TypePassively Reflective
RefreshingPartial Refresh Support

Features at a glance

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
SPI interface, for connecting with controller boards like Arduino/STM32, etc.
Onboard voltage translator, compatible with 3.3V / 5V MCUs
Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

operating voltage	3.3V/5V	grey scale	2
interface	3-wire SPI, 4-wire SPI	partial refresh time	0.3s
outline dimensions	65 × 30.2mm	full refresh time	2s
display size	48.55 × 23.71mm	refresh power	26.4mW (typ.)
dot pitch	0.194 × 0.194mm	standby current
resolution	250 × 122 pixels	viewing angle	>170°
display color	black, white

Advantages of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Standard Raspberry Pi 40PIN GPIO header

compatible with Raspberry Pi series boards, Jetson Nano

for reference only, the Raspberry Pi in the picture is NOT included

Onboard SPI control interface

for use with other controller boards like STM32/Arduino

VCC	3.3V/5V
GND	Ground
DIN	SPI MOSI pin
CLK	SPI SCK pin
CS	SPI chip selection, low active
DC	Data / Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output (high for busy)