LoRa Fiberglass Antenna Kit; 863-870MHz; 8dBi; 1300mm; RF Explorer RFELA-4/88X

Fibreglass LoRa antenna with a gain of 8 dBi, frequency range 863-870MHz, and 1300mm length, comes with a CFD200 cable with 1m length and a mounting bracket, compatible with SenseCAP M1 Indoor Gateway.

Features

•     Average gain: 8dBi
•     Frequency range: 863-870MHz
•     Length of 130cm
•     Robust enough to withstand the harsh outdoor environment
•     Can connect to the SenseCAP Outdoor Gateway and SenseCAP M1 Indoor Gateway
•     Includes hardware for mounting
•     Comes with a 1m cable

For some applications like in an urban environment or where large stretches of land have to be monitored the normal range of LoRa might not be enough. So If you need to increase the range for your LoRa devices, then this outdoor LoRa Fiberglass antenna will be the ideal addition to your LoRa system.  It’s a robust solution to provide extra power and range for outdoor LoRa Base stations. The antenna has an average gain of 8 dBi, a length of 130cm, and a frequency range from 863-870MHz, and it comes with hardware for pole and wall mounting.
 
The Antenna has an N-J Double tooth connector, and it comes with an N-Female to RP-SMA plug cable so it can be easily connected to the SenseCAP Gateways.

Application

The antenna can be used in any environment where long-range LoRa connections are required.

•     Agriculture
•     Environmental Monitoring
•     Urban Monitoring

Antenna Specification

Frequency : 863-870MHz
Impedance : 50Ω
VSWR : ≤2.5
Gain : 8±1dBi
Max Efficiency : >80%
Radiation Pattern : Omni-directional
Connector : N-Type Male
Material : Fiberglass
Length : 800±10mm
Operation Temperature : -30℃~65℃

Cable Specification
Frequency Range :  0-6000MHz
Impedance : 50Ω
VSWR : <2.0
Insertion loss : Insulation resistance : >15 MΩ
Voltage breakdown : >500V
External cable diameter : 5mm
Connector     :  Type N Female /Type RP-SMA Male
Conductor material : Copper
Binder material : Aluminum/PE Tape
Braid material : Tinned copper wire
Operation temperature : -40°C to + 65°C

Part list

Antenna 1*
CFD200 cable 1m 1*
Mounting Bracket 1*